Loading…
How to Care for Your Vinyl Soundtrack Collection — You Can Even Wash Records

Video game soundtracks have long been more than just a digital part of a game that we listen to while playing or look up later on streaming services. They’re increasingly being released on physical media, and vinyl has become a popular way to bring home a piece of a beloved game. Publishers put a lot of care into these releases, offering records in different colors, beautiful artwork, special sleeves, and collector’s editions. It’s no surprise that they’ve also become popular gifts for gamers.

If you buy or receive a soundtrack like this, it would be a shame not to take good care of it. Vinyl isn’t an ordinary medium that you can use for decades without any maintenance. There’s something beautifully entropic about listening to music on a record. Every play wears it down ever so slightly, gradually changing its physical state. With digital music, we can play the same track endlessly without changing the recording itself, but vinyl is a little different.

When a record plays, the stylus’s diamond tip moves through microscopic grooves in the polyvinyl chloride (PVC). Contact between the two materials, along with pressure and friction, gradually wears down their surfaces. Although the stylus tracking force is measured in grams, the contact area between the tip and the groove is extremely small, so the localized force is considerable. The delicate groove details that carry higher frequencies are especially vulnerable. Incorrect cartridge alignment, excessive tracking force, or a dirty stylus can make wear even more pronounced. That’s why older records played for decades can gradually lose some of their original sound.

Listening to vinyl is essentially a record of its own demise. That sounds a little depressing, but it doesn’t mean we should leave our records untouched in their sleeves. Quite the opposite. With proper care, they can bring us joy for decades and may even be passed down to future generations. Besides, not everything we hear as crackling and hiss during playback has to be the result of irreversible damage. Often, it’s simply dirt that has settled in the grooves.

How to Care for Your Vinyl Soundtrack Collection — You Can Even Wash Records

Proper storage is key

Caring for vinyl starts as soon as we put it away on a shelf. Records should be stored upright, like books in a library. Long-term storage flat, especially in a large stack, can warp them. It’s also best not to leave them leaning or packed so tightly among other records that they press against each other too much.

The environment matters, too. High temperatures, direct sunlight, and significant temperature fluctuations are bad for vinyl. So storing your collection in an attic that turns into a sauna in summer, or near a radiator, is definitely not a good idea. A dry place with a stable room temperature and moderate humidity is best. Excessive humidity can also damage paper sleeves and create conditions for mold to develop.

Ideally, records should be kept in protective inner sleeves. Higher-quality antistatic sleeves can help reduce the buildup of dust and other debris. Outer plastic sleeves protect album covers from scuffs, dust, and damage during handling. This is especially useful for soundtracks that often come in special packages with artwork, art books, and other collector’s items.

Proper handling should go without saying. Hold records by the edges or, if necessary, by the label in the center—never touch the playing surface with your fingers. Oils and dirt from your skin can get directly into the grooves. It’s worth using an antistatic brush before playing a record, and don’t forget to clean the stylus itself. Proper turntable setup is also important, especially the tracking force and cartridge alignment.

These simple steps won’t stop the natural wear caused by playing records, but they can help prevent unnecessary damage. And there’s one more option that might sound a little bizarre: you can wash records, too.

How to Care for Your Vinyl Soundtrack Collection — You Can Even Wash Records

You can wash records, too. And no, you don’t need a stream

The idea of heading to a stream to scrub records might be funny, but washing vinyl is a real and fairly common part of caring for a collection. Special machines are available to remove dust, grease, and other debris that gradually builds up in the grooves.

There are several types of record cleaners on the market. The simplest are manual cleaning systems, where you place a record in a container of cleaning solution and clean it mechanically with brushes. Vacuum record cleaners are a little more sophisticated. They use a special fluid to loosen dirt, then vacuum it off the record along with the dissolved debris. The advantage is that no cleaning solution or dissolved dirt is left in the grooves.

Another option is an ultrasonic cleaner. It uses high-frequency vibrations in a liquid to create and collapse microscopic bubbles. This phenomenon, known as cavitation, helps loosen dirt even in hard-to-reach places. Some machines clean multiple records at once, which is especially useful for people with larger collections.

This kind of cleaning is useful even with regular use. Dust gets into the grooves from the air, we transfer dirt with our hands, and over time other microscopic particles settle on the surface. These can cause unpleasant crackling and hiss during playback. Regular cleaning can therefore improve the sound and reduce the amount of dirt the stylus encounters while playing a record.

How to Care for Your Vinyl Soundtrack Collection — You Can Even Wash Records

Record cleaners are even more useful when you come across older records. Perhaps your parents, grandparents, or someone you know once had an interesting collection that they forgot about over the years. Or you might uncover some treasures in an attic, a basement, or an estate. Some could be fifty years old or more, and they may have been through a lot in that time: covered in dust, handled repeatedly, caked with dried-on dirt, and housed in sleeves that have long since lost their original appearance. In worse cases, improper storage in a damp environment may have led to mold.

We had the chance to try cleaning a record just like this. It had been stored in unsuitable conditions for years, and its surface was covered with visible spots and layers of dirt. Without examining it more closely, we couldn’t say for sure whether it was mold or some other accumulated grime, but its condition was far from ideal. After a thorough cleaning, however, the record looked much better. The spots were gone and, more importantly, it played beautifully. Something that at first looked like a write-off was once again a perfectly usable part of the collection. You’ll find before-and-after photos further down the article,

Of course, a record cleaner can’t remove scratches, fix warping, or restore grooves that have already worn down. It can, however, remove dirt that needlessly affects playback. If a record has only been damaged by dust and grime, the results can be surprisingly good. Mold requires more care: if it has affected the paper sleeve, it’s best to separate and replace it, while the record itself should be assessed and cleaned using an appropriate method.

How to Care for Your Vinyl Soundtrack Collection — You Can Even Wash Records

Pro-Ject VC-E Mini: a small cleaner for big treasures

We used the Pro-Ject VC-E Mini, one of the more compact solutions for caring for a vinyl collection at home. It’s a vacuum record cleaner that combines wet cleaning with the subsequent removal of fluid and dirt. Its main advantages are its small size, ease of use, and design, which takes up little space even in a smaller apartment. You can buy it for as little as €279.

Unlike some larger cleaners that use a vacuum arm positioned above the record, the VC-E Mini vacuums from underneath. The record is placed on a rotating platter with a protective neoprene mat and secured with a magnetic clamp. This also protects the paper label from contact with the cleaning fluid. There’s no need to screw anything in or make complicated adjustments.

Cleaning is handled by a special brush and the Wash it 2 solution included in the package. The record spins at 30 revolutions per minute (you can turn it in either direction). As it spins, the user applies the cleaning fluid and then spreads it evenly across the entire playing surface with the brush. The solution helps loosen dirt from the grooves, and after a short wait, the vacuum system takes over. It removes the fluid along with the loosened dirt through a special opening lined with velvet strips. The result should be a clean, dry record with no cleaning solution left behind.

How to Care for Your Vinyl Soundtrack Collection — You Can Even Wash Records

The machine is designed for standard 12-inch records. It measures 230 × 185 × 155 mm and weighs 2.1 kilograms without the power supply. Its body is made from 4 mm-thick aluminum composite, and it is manufactured in the Czech Republic. It’s no design showstopper, and you certainly wouldn’t display it on a shelf at home—but that’s not the point. It may be a plain metal “box” with a pair of buttons that look like they belong on an old power supply, but what matters is how it works, and it does that very well. The package includes the cleaner, a power supply, a magnetic record clamp, a brush, a replacement adhesive strip for the vacuum opening, and a 100 ml bottle of Wash it 2 cleaning solution.

The amount of cleaning fluid used is worth noting, too. The manufacturer recommends applying approximately 3 ml to each side of a record, so cleaning both sides of an LP takes about 6 ml. The included 100 ml is therefore enough for approximately 16 records. Replacement fluid can also be purchased separately online or from specialist audio stores.

The cleaner itself also needs some attention. Although it doesn’t require complicated regular maintenance, it’s a good idea to leave the vacuum running for about 15 to 30 seconds after cleaning to remove any remaining fluid from the internal system. The velvet strips around the vacuum opening should also be checked regularly and kept clean. The machine has its own collection tank for used fluid, which can be emptied through a cap at the back when needed. Naturally, you should unplug it before doing this. When emptying the tank, it’s also important to tilt the machine only toward the drain opening so that fluid doesn’t get into the internal components. However, the manufacturer could provide more specific instructions on cleaning the machine in the manual.

How to Care for Your Vinyl Soundtrack Collection — You Can Even Wash Records

 

Vinyl soundtracks deserve proper care

Video game soundtracks on vinyl are a lovely way to keep the music from your favorite games with you even when you’re away from the screen. Some releases are so well done that it would be a shame to leave them on a shelf and never listen to them. At the same time, they’re physical media that need a little attention if we want them to last as long as possible.

You don’t need to invest in an expensive cleaning machine right away. Proper storage, careful handling, and regular dust removal are the essentials. But if you have a larger collection, or have found old records that have seen better days, a record cleaner can be very useful. Our experience shows that even a record that looks like a write-off at first can still be a pleasant surprise after a thorough cleaning.

So although every play brings our favorite recordings a little closer to their demise, we don’t have to make it happen any sooner than necessary. After all, we don’t buy the soundtrack to a favorite game just to admire it in its protective sleeve for the rest of our lives. We want to play it, remember the adventures it accompanied, and enjoy it years later. We just need to take a little care of it so it can keep bringing us joy for as long as possible.

Comments

:)